home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir24 / hamcom30.zip / README < prev    next >
Text File  |  1994-06-15  |  3KB  |  64 lines

  1.  
  2. Notes on HamComm 3.0:                         Paderborn, June 15th 1994
  3.  
  4.   HamComm is a program for ham radio communications.  It supports
  5. reception and transmission of radio teletype (RTTY), AMTOR ARQ/FEC,
  6. SITOR A/B, NAVTEX and Morse code (CW) signals.  A decoder for SHIP and
  7. SYNOP reports from weather stations is also included. 
  8.  
  9.   HamComm does not require an RTTY converter, not even a modem chip. 
  10. The audio output of the transceiver is connected to the serial port of
  11. any PC/XT/AT compatible computer thru a very simple low-cost interface. 
  12. Only one IC is needed (Op-Amp LM741 or similar) and a few diodes,
  13. capacitors and resistors.  For transmission the speaker output is
  14. connected to the microphone input of the transceiver thru a passive r/c
  15. filter.  There is also a tone signal available at the COM port without
  16. any modification to the computer.  Audio frequency decoding and
  17. serial/parallel conversion are all done in software.
  18.  
  19.   HamComm will automatically detect the type of video adapter in use. 
  20. MDA, CGA, EGA, VGA and Hercules are supported.  All graphics routines
  21. are written in assembler for speed.  No attempt has been made to
  22. avoid screen flicker (snow) on cheap CGAs. 
  23.  
  24.   HamComm works to some degree on XT maschines, but the graphics
  25. displays of the input signal are more fun to watch on an AT-class
  26. computer.  Nearly all of the functions can also be controlled by
  27. using a mouse.  A harddisk is recommended but not required.  All
  28. texts are written in english and the online help system includes the
  29. schematics for the interface circuit.  There are also predefined
  30. standard phrases, a QTH distance/direction calculator and a callsign
  31. decoder.  Currently about 370KB of free ram is required. 
  32.  
  33.   HamComm will probably NOT run under any kind of multitasking software
  34. like Desqview, Windows, Windows NT or OS/2.  It needs direct control of
  35. the interrupt controller, timer chip and serial I/O hardware. 
  36.  
  37.   On startup the program automatically searches for a configuration
  38. file called "HC.CFG".  The current directory is searched first, then
  39. all other directories in the current "PATH" environment variable.  A
  40. sample config file is provided.  Read it carefully and make the
  41. required adjustments using your favourite text editor. 
  42.  
  43.   The interface schematics are included in the online help texts and
  44. near the end of the manual. There is also a section on trouble shooting
  45. in case of hardware problems.
  46.  
  47.   HamComm 3.0 Copyright (c) 1990 - 1994 by W.F.  Schroeder DL5YEC All
  48. rights reserved.  This is NOT a "public domain" or "freeware" program. 
  49.  
  50.   You are granted a limited license to use this software for evaluation
  51. purposes for a period of 30 days.  If you intend to continue using this
  52. software after the 30 day evaluation period, you must make a
  53. registration payment.  See the documentation for details. 
  54.  
  55.   The author can be reached via the packet radio mailbox system.  Send
  56. your error reports, suggestions and comments to "DL5YEC@DB0BQ.DEU.EU". 
  57. If you have access to the internet try e-mail to "schroeder.pad@sni.de". 
  58. If you have access to Usenet you can post HamComm related questions to
  59. newsgroup "rec.radio.amateur.digital.misc". 
  60.  
  61. Have fun!
  62.  
  63. 73 es 55 de Django DL5YEC
  64.